When running on Embedded Project Oberon, SwitchTest.Run gives:
Switch 2 is on
Switch 3 is on
Switch 6 is on
Switch 7 is on
As my Nexys A7 board has 16 switches, I have changed SwitchCount = 16; but they do not show up?
Search found 30 matches
- Tue Apr 16, 2024 11:53 pm
- Forum: Astrobe for FPGA RISC5
- Topic: Additional switches not detected on Nexys A7 board
- Replies: 2
- Views: 1828
- Thu Apr 11, 2024 12:57 am
- Forum: Astrobe for FPGA RISC5
- Topic: Can I use a USB keyboard with Embedded Project Oberon?
- Replies: 1
- Views: 1011
Can I use a USB keyboard with Embedded Project Oberon?
Is it possible to attach and read in a USB keyboard directly when using Embedded Project Oberon on a Nexys A7 board?
- Thu Nov 16, 2023 4:06 am
- Forum: Astrobe for ARM Cortex-M0, M3, M4 and M7
- Topic: Module initialisation order?
- Replies: 1
- Views: 7788
Re: Module initialisation order?
Yes. If you have the Professional Edition you can confirm the order of module initialsation by disassembling the application and looking at the sequence of <modulename>..init calls in the initialisation code procedure (e.g. Blinker..init) of your application.
- Thu Nov 16, 2023 3:56 am
- Forum: Astrobe for ARM Cortex-M0, M3, M4 and M7
- Topic: Module initialisation order?
- Replies: 1
- Views: 7788
Module initialisation order?
Does the module list in the 'map' file for a linked program represent their initialisation order, top to bottom?
- Tue Feb 22, 2022 11:02 pm
- Forum: CPIde and Component Pascal
- Topic: GPCP Unhandled Exception
- Replies: 3
- Views: 20444
GPCP Unhandled Exception
I have installed Component Pascal and CPIde on my Windows 10 laptop. When I try to compile the simple "Hello World" example within CPIde I see: Unhandled Exception: System.NullReferenceException: Object reference not set to an instance of an object. at GPBinFiles.GPBinFiles.findOnPath(Char[] pathNam...
- Tue Feb 22, 2022 10:05 pm
- Forum: CPIde and Component Pascal
- Topic: Run button behaviour?
- Replies: 1
- Views: 10785
Run button behaviour?
If I compile and run an example, then load and compile a different example, the run button runs the first example, not the one that was just compiled. Closing the IDE and opening it again allows the correct example to be launched via the run button. This seems to be a persistent phenomenon.
- Mon Mar 15, 2021 8:41 pm
- Forum: Astrobe for FPGA RISC5
- Topic: RAM port connection
- Replies: 1
- Views: 14437
RAM port connection
I noticed that the port `adr` for the RAM module is 18bits, whilst it's driving signal RISC5.v is 24bits. I was hoping you could tell me how that's resolved during synthesis? Are only the 18LSB used?
- Fri Sep 04, 2020 6:12 am
- Forum: Astrobe for ARM Cortex-M0, M3, M4 and M7
- Topic: Can the limit on the number of record extension levels be increased?
- Replies: 1
- Views: 18199
Can the limit on the number of record extension levels be increased?
We are using the "Record- Inheritance" quite intensively. Unfortunately, this is now limited to a depth of 4. Would it be a big deal to increase this to something a bit higher like 8 or 16?
- Mon Oct 01, 2018 12:09 am
- Forum: Astrobe for ARM Cortex-M0, M3, M4 and M7
- Topic: HCFiler for Cortex-M4
- Replies: 1
- Views: 12526
HCFiler for Cortex-M4
what are the likelyhood of your HCFiler software running OK on the Nucleo-STM32L432KC ? I have only found HCFiler posted for the M3 on the Forums. I'm guessing the code's likely to work, but again thought I'd better ask first in case you've already tried it on M4.
- Wed Jun 27, 2018 8:23 am
- Forum: Astrobe for FPGA RISC5
- Topic: How to create a new user program file?
- Replies: 1
- Views: 12868
How to create a new user program file?
Odd thing on the Pepino board, I can load existing Oberon source system files from the Saalima SD card and edit them and compile and rum, but I haven't figured out how to create a user program file, such as a test "Hello World" or something basic,
I must be missing something.
I must be missing something.