I am a new to oberon and Astrobe. I just written a simple programme to display a "Hello World" on astrobe terminal. I build,linked and compiled code there is no error and run the programme. But nothing is displayed on terminal. I am using starter edition.
Did you also upload your code to the development board using the Run > Upload ... command before you attempted to run it?
I recommend that you first start with the LED blinker program by following the instructions in the Getting Started section of the Help file:
Code: Select all
Help > Contents and Index > Getting Started > Quick Start Guide ...
When you have got that running, then try to run one of the general examples supplied with Astrobe which display output to the terminal (e.g. Info.mod). Once you have successfully completed both of those tasks it would be a good time to start writing your own programs.
I am using Embedded Artists development board(for lpc1769). I have not used Run > Upload ... command before attempted to run. This is my programme as below :
and this code does not contain any controller related module its job is to print only Hello World on astrobe terminal,so even it is necessary to upload?
Note that you need to include the special library module Main in your import list to indicate that HelloWorld is your main module, not a library module, before you can successfully link/build your HelloWorld program to create a working executable file:
Code: Select all
IMPORT Out, Main;
The programme provided with astrobe InfoUART3 loaded into lpc through UART0 ( tried with all baudrate). when clicked run option nothing it is displaying on terminal and when giving input got this kind of exception:
unhandled exception has occured in your application... The port is closed.